Print

CANopenIA System on Module (SoM)

Embedded modules with CANopenIA technology


Display per page
Sort by
Product no.: ESS-CGBRY

TEMPORARY HIGHER PRICE UNTIL CHIP BECOMES AVAILABLE THROUGH DISTRIBUTION AGAIN

CANgineBerry - Active CANcrypt and CANopen SoM System on Module for Raspberry Pi and other embedded computing plattforms

The CANgineBerry CANopen is an active CAN co-processor module that uses a regular UART communication channel towards the host system. With its independent 32-bit microcontroller, the CANgineBerry can easily execute CAN protocols with tough timing demands such as CANcrypt or CANopen with response times of under 10 ms.

72.00 *
Product data sheet

In stock
can be shipped within 4 days

Product no.: ESS-CGBRY-MK

TEMPORARY HIGHER PRICE UNTIL CHIP BECOMES AVAILABLE THROUGH DISTRIBUTION AGAIN

Maker Version, without CAN DB9 connector

CANgineBerry - Active CANcrypt and CANopen SoM System on Module for Raspberry Pi and other embedded computing plattforms

The CANgineBerry CANopen is an active CAN co-processor module that uses a regular UART communication channel towards the host system. With its independent 32-bit microcontroller, the CANgineBerry can easily execute CAN protocols with tough timing demands such as CANcrypt or CANopen with response times of under 10 ms.

67.00 *
Product data sheet

In stock
can be shipped within 4 days

Product no.: ESS-COIA-M0-S

Single CANopenIA-M0 moudle with sockets.

The CANopen SoM System, on Module CANopenIA-M0 allows integration of the CANopen functions in user’s hardware. The module can easily be integrated into the user’s hardware with a two row 48 pin connector. Components can be placed under the module on the main PCB.
The module includes the CANopen SoC System on Chip, the clock generation, the EEPROM to store the setup data and two LEDs to signal status and error information according to the CANopen specification. The connector has 1.27mm grid with two rows of 24 pins each...

64.00 *
Product data sheet

In stock

Product no.: ESS-COIA-M0-S5

Five CANopenIA-M0 moudles with 10 sockets

The CANopen SoM System, on Module CANopenIA-M0 allows integration of the CANopen functions in user’s hardware. The module can easily be integrated into the user’s hardware with a two row 48 pin connector. Components can be placed under the module on the main PCB.
The module includes the CANopen SoC System on Chip, the clock generation, the EEPROM to store the setup data and two LEDs to signal status and error information according to the CANopen specification. The connector has 1.27mm grid with two rows of 24 pins each...

299.00 *
Product data sheet

In stock

Product no.: ESS-COIA-M0

Ten or more modules, without sockets.

The CANopen SoM System, on Module CANopenIA-M0 allows integration of the CANopen functions in user’s hardware. The module can easily be integrated into the user’s hardware with a two row 48 pin connector. Components can be placed under the module on the main PCB.
The module includes the CANopen SoC System on Chip, the clock generation, the EEPROM to store the setup data and two LEDs to signal status and error information according to the CANopen specification. The connector has 1.27mm grid with two rows of 24 pins each...

53.00 *
Product data sheet

In stock

Product no.: ESS-COIA-STB

The CANopen SoM System on Module CANopenIA-M0 provides

  • USB Mini Connector with FTDI Uart for power supply and Remote Access
  • One CAN connectors with a switchable terminating resistor
  • 4 LEDs via jumper cable connectable to output port pins
  • 2 switches via jumper cable connectable to input port pins
  • CANopenIA-M0 module
  • 4*12 header pins from module, marked
79.00 *
Product data sheet

In stock

Product no.: KIT-COIAM0-DK

The CANopenIA-M0 starter kit contains all you need to immediately get a CANopen environment up and running:

  • USB to CAN adapter (PCAN-USB from PEAK Systemtechnik)
  • CANopen Architect Standard Software, support and updates for 6 months
  • CANopen Magic Lite Software, support and updates for 6 months
  • CANopenIA-M0 starter board with COIA-M0 module and cables

 

499.00 *

In stock

Product no.: ESS-COIA-EVAL

Evaluation board for the CANopen SoM (System on Module) CANopenIA-M0

  • Two CAN connectors with a switchable terminating resistor
  • DIP switches for setting baud rate and node ID
  • 28 LEDs to signal the state of the binary output port pins
  • 28 switches to stimulate the binary input port pins
  • 4 Potentiometer to stimulate either the internal or the external ADC ports
  • 4 LEDs to signal the output voltage on the external DAC ports
345.00 *
Product data sheet

In stock

Product no.: KIT-COIAM0

The CANopenIA-M0 starter kit contains all you need to immediately get a CANopen environment up and running:

  • USB to CAN adapter (PCAN-USB from PEAK Systemtechnik)
  • CANopen Architect Standard Software, support and updates for 6 months
  • CANopen Magic Lite Software, support and updates for 6 months
  • CANopenIA-M0 evaluation board with COIA-M0 module
  • Wall power supply and all needed cables for wiring

The evaluation board included in the COIA-M0 starter kit provides

  • Two CAN connectors with a switchable terminating resistor
  • DIP switches for setting baud rate and node ID
  • 28 LEDs to signal the state of the binary output port pins
  • 28 switches to stimulate the binary input port pins
  • 4 Potentiometer to stimulate either the internal or the external ADC ports
  • 4 LEDs to signal the output voltage on the external DAC ports
765.00 *

In stock

Product no.: PK-IPEH-003080

General I/O Module with CANopen (FD) Software Option

The PCAN-MicroMod FD is a small plug-in board with optional CANopen and CANopen FD connection on the one side and various physical inputs and outputs on the other side. The logical linking of both sides is done by the microcontroller NXP LPC54618. With the PCAN-MicroMod FD, electronics developers can easily integrate I/O functionality with CAN connection into their project.

The PCAN-MicroMod FD is configured using the supplied Windows software.

Delivery consists of a PCAN-MicroMod FD module and an aktication code for CANopen (FD).

Requirements:


The configuration requires a PEAK CAN interface.

139.00 *
Product data sheet

In stock
can be shipped within 2 days

Product no.: PK-IPEH-003082

Generic Evaluation Board with one PCAN-MicroMod FD module and CANopen and CANopen FD option.

This product is an evaluation board for the PCAN-MicroMod FD and allows the conception and development of own circuits with CAN connection and I/O functionality. Via pick-offs, screw terminals, switches, and potentiometers, the user can access the resources of the attached PCAN-MicroMod FD and check configurations or test circuits.

The activation of the CANopen or CANopen FD functionality is done with a supplied Windows software which transfers the configuration data to the module via CAN. The optionally available Evaluation Kit includes the CAN interface and a CAN cable required for this purpose.

Delivery consists of an Eval Board with PCAN-MicroMod FD module and an aktication code for CANopen (FD).

Requirements:


The configuration requires a PEAK CAN interface.

395.00 *
Product data sheet

In stock
can be shipped within 2 days

Product no.: KIT-COPFD

The CANopen FD Starter Kit consists of a PCAN-MicroMod FD Evaluation board, a PCAN-USB FD Interface and our CANopen Magic Professional software.

The Eval board features various CANopen FD configration options that can be set, tried and analysed using the CANopen Magic software.

1,630.00 €
1,299.00 *

Currently unavailable

Product no.: PK-COIA-SER

PEAK PCAN-RS232 with CANopenIA Coprocessor firmware.

Generic CANopen to serial module, communicates with host application via UART serial channel.

CANopenIA Configurations are created with CANopen Architect and get transferred into the device using CANopen Magic or CANopen Diag.

190.00 *
Product data sheet

Currently unavailable

* Prices before VAT, plus delivery