Your Experts for CANopen, CANopen FD and J1939
Your basket is empty.
Categories All Hardware CANopenIA System on Module (SoM)
CANopenIA System on Module (SoM)
Embedded modules with CANopenIA technology
|
Product no.: ESS-CGBRY
TEMPORARY HIGHER PRICE UNTIL CHIP BECOMES AVAILABLE THROUGH DISTRIBUTION AGAIN CANgineBerry - Active CANcrypt and CANopen SoM System on Module for Raspberry Pi and other embedded computing plattforms The CANgineBerry CANopen is an active CAN co-processor module that uses a regular UART communication channel towards the host system. With its independent 32-bit microcontroller, the CANgineBerry can easily execute CAN protocols with tough timing demands such as CANcrypt or CANopen with response times of under 10 ms. |
In stock |
|
|
|
|
Product no.: ESS-CGBRY-MK
TEMPORARY HIGHER PRICE UNTIL CHIP BECOMES AVAILABLE THROUGH DISTRIBUTION AGAIN Maker Version, without CAN DB9 connector CANgineBerry - Active CANcrypt and CANopen SoM System on Module for Raspberry Pi and other embedded computing plattforms The CANgineBerry CANopen is an active CAN co-processor module that uses a regular UART communication channel towards the host system. With its independent 32-bit microcontroller, the CANgineBerry can easily execute CAN protocols with tough timing demands such as CANcrypt or CANopen with response times of under 10 ms. |
In stock |
|
|
|
|
Product no.: ESS-COIA-M0-S
Single CANopenIA-M0 moudle with sockets. The CANopen SoM System, on Module CANopenIA-M0 allows integration of the CANopen functions in user’s hardware. The module can easily be integrated into the user’s hardware with a two row 48 pin connector. Components can be placed under the module on the main PCB. |
In stock |
|
|
|
|
Product no.: ESS-COIA-M0-S5
Five CANopenIA-M0 moudles with 10 sockets The CANopen SoM System, on Module CANopenIA-M0 allows integration of the CANopen functions in user’s hardware. The module can easily be integrated into the user’s hardware with a two row 48 pin connector. Components can be placed under the module on the main PCB. |
In stock |
|
|
|
|
Product no.: ESS-COIA-M0
Ten or more modules, without sockets. The CANopen SoM System, on Module CANopenIA-M0 allows integration of the CANopen functions in user’s hardware. The module can easily be integrated into the user’s hardware with a two row 48 pin connector. Components can be placed under the module on the main PCB. |
In stock |
|
|
|
|
Product no.: ESS-COIA-STB
The CANopen SoM System on Module CANopenIA-M0 provides
|
In stock |
|
|
|
|
Product no.: KIT-COIAM0-DK
The CANopenIA-M0 starter kit contains all you need to immediately get a CANopen environment up and running:
|
499.00 €
*
In stock |
|
|
|
|
Product no.: ESS-COIA-EVAL
Evaluation board for the CANopen SoM (System on Module) CANopenIA-M0
|
In stock |
|
|
|
|
Product no.: KIT-COIAM0
The CANopenIA-M0 starter kit contains all you need to immediately get a CANopen environment up and running:
The evaluation board included in the COIA-M0 starter kit provides
|
765.00 €
*
In stock |
|
|
|
|
Product no.: PK-IPEH-003080
General I/O Module with CANopen (FD) Software Option The PCAN-MicroMod FD is a small plug-in board with optional CANopen and CANopen FD connection on the one side and various physical inputs and outputs on the other side. The logical linking of both sides is done by the microcontroller NXP LPC54618. With the PCAN-MicroMod FD, electronics developers can easily integrate I/O functionality with CAN connection into their project. The PCAN-MicroMod FD is configured using the supplied Windows software. Delivery consists of a PCAN-MicroMod FD module and an aktication code for CANopen (FD). Requirements:The configuration requires a PEAK CAN interface. |
In stock |
|
|
|
|
Product no.: PK-IPEH-003082
Generic Evaluation Board with one PCAN-MicroMod FD module and CANopen and CANopen FD option. This product is an evaluation board for the PCAN-MicroMod FD and allows the conception and development of own circuits with CAN connection and I/O functionality. Via pick-offs, screw terminals, switches, and potentiometers, the user can access the resources of the attached PCAN-MicroMod FD and check configurations or test circuits. The activation of the CANopen or CANopen FD functionality is done with a supplied Windows software which transfers the configuration data to the module via CAN. The optionally available Evaluation Kit includes the CAN interface and a CAN cable required for this purpose. Delivery consists of an Eval Board with PCAN-MicroMod FD module and an aktication code for CANopen (FD). Requirements:The configuration requires a PEAK CAN interface. |
In stock |
|
|
|
|
Product no.: KIT-COPFD
The CANopen FD Starter Kit consists of a PCAN-MicroMod FD Evaluation board, a PCAN-USB FD Interface and our CANopen Magic Professional software. The Eval board features various CANopen FD configration options that can be set, tried and analysed using the CANopen Magic software. |
1,630.00 €
1,299.00 €
*
Currently unavailable |
|
Product no.: PK-COIA-SER
PEAK PCAN-RS232 with CANopenIA Coprocessor firmware. Generic CANopen to serial module, communicates with host application via UART serial channel. CANopenIA Configurations are created with CANopen Architect and get transferred into the device using CANopen Magic or CANopen Diag. |
Currently unavailable |